Do the words screen printing invoke joy or fear within you? If it’s fear, is it because screen printing is something you’ve come to believe is reserved for those pro DIYers with the hippie vibe?
Fortunately, none of that is true, screen printing is easy to do and can be learned by anyone. It is also a gold standard for your DIY cred because it is the most important thing all DIYers should know. So you’ve come to the right place to advance your skills.
This tutorial is a how-to for screen printing t-shirts at home. You’ll learn the best steps taken for DIY t-shirt screen printing which is basically how to put a picture on a shirt.
You’ve probably seen them before, the t-shirts with custom messages on them. They are often sold at festivals or events where people came together for a common goal such as yoga retreats, activist protests, or peace rallys. They have custom messages printed that unite the people attending the event, which makes them extremely popular.
But DIY t-shirt screen printing goes beyond events, you can screen print your artwork on a collection of t-shirts you’ll sell in a merch store, which is currently the most popular application of screen printing t-shirts. YouTube Vloggers with high followings usually have a merch store selling their custom logos on printed apparel.
You’ll first need to assemble your materials and place them at the correct stations in your workspace. Remember to take good care of your materials and buy ones that are high quality if buying new. Having higher quality materials that you maintain in a clean environment allows you to print higher quality images.
You can DIY some of these materials such as the print screen. All you need to make a screen printing frame is to screw 2 x 2 wood frames tightly together, then very tightly staple your silk onto the frame, trim the excess silk off until you have neat edges without overflowing fabric, use painter’s tape to secure the stapled edges of the screen and prevent the paint from overflowing, you can tape the inside of your frame for caution.
Read More:
If you are buying all your materials or have already done so, here is a list of materials you’ll need to successfully screen print your t-shirts at home.
- A black silkscreen with a pre-stretched 110 mesh frame
- Your Design to be printed
- Transparency paper for the laser printing
- Photo Emulsion
- A 150watt light bulb
- Squeegee
- Ink
- Blank canvas on which you will be printing, this can be any of the following bags, t-shirts, posters, mouse pads
- Clean cleaning rags
- Gloves and an Apron to protect your clothes
- A table covered with a newspaper or anything to protect the surface
- A sheet of black fabric or black paper
- 2 Lamps
- Optional : 1x red or yellow light bulb, table clamps or weights to keep everything in place
There are a few extra items that are optional but important. Having them improves your workflow and maintains the integrity and quality of your tools.
Below is a list of optional by valuable items.
A degreaser is a cleaning agent made specifically to clean your screen. If you don’t have one, then use warm water, but you should consider buying a degreaser for future clean-ups. Degreasers like Screen are water-based, eco-friendly cleaning agents that gently and effectively remove dust, oils, and dirt from your screen which can cause spots on your final product and distorting it.
A degreaser also removes ink from your screen to clean it once you are done with a project, ensuring you avoid unwanted color mixing. Always wash your screen after a project, this ensures that it is kept clean free of dirt, and ready for use at all times.
Your screen should always be placed off the ground and in a place where air flows unobstructed through the mesh. The screen rack allows air to easily flow through the mesh, protecting it from dirt and hastening drying time.
Screen racks are usually vertical hanging racks or horizontal built-in with support on the sides that hold the screen.
You will use this tool to coat the screen with the appropriate layer of emulsion. Your scoop coater should have plastic end caps that you’ll insert before you start coating which allow your emulsion to remain horizontally balanced in the scoop as you coat your screen. It should also be easy to take apart so that you can clean well for your next project. Select a scooper 4″ smaller than the width of your screen size, that fits within the width of your screen allowing you to easily and evenly apply the emulsion every time.
This is nice to have on hand because it helps you fix any unwanted spots on your screen that may appear after exposure. These spots referred to as pinholes allow light to pass through parts of the screen that should be covered by the emulsion. If they appear on the exposed screen, they can ruin your final image by adding specs to it. Always lift your screen up to the light after exposure to find pinholes, if you find some a Blockout pen allows you to easily and quickly fill these holes or smooth out any marks caused by the emulsion process. You simply press the tip of the block out applicator or pen to the pinhole or mark and it is gone. Make sure you buy an ultra-fast drying pen that is also water-soluble.
These ensure that your screen and scoop coater is well cleaned. You’ll use your scrub pad after spraying the degreaser on your screen and waiting a few minutes. The scrub pad will remove any excess ink, oil, dust, or dirt from your screen which not only prepares it for your next project but also increases its quality and longevity.
You’ll clean all your tools in a clean sink. Make sure it’s always clean.
Having a fan allows you to increase the source of airflow in the room allowing your screen to dry properly. A dehumidifier is a good option too because it sucks the humid air out of the room which increases the quality of your end product. Go with the one that works best for your environment. If you are in a dry hot place, a fan will be useful vs a moist environment where a dehumidifier works best.
Now that you have all your tools. Follow this how-to for screen printing t-shirts tutorial below to learn how to put a picture on a shirt. It is written in sequential order, so follow it from the first step to the last step.
We’ll start by creating a good working environment. Clean up your environment and make sure it’s dustless. As stated above, dust particles can cause pinholes on your screen which will cause unwanted marks on your final result. It’s best to remove any possibility of this happening by maintaining a clean, dust-free studio.
Now would be a good time to turn on the fan or dehumidifier and improve the airflow in your studio. You want to create an environment that allows the ink to quickly dry once applied to the canvas, otherwise, it could start dripping and ruin your work.
Once everything is clean and orderly, assemble your tools. Keep them within easy reach and make sure they have their own station in your workspace. This will keep you organized.
Whether your screen is straight out of the box or gently used, degreasing it is an important step in ensuring you avoid pinholes after your exposure. Use a spray bottle to distribute the degreaser solution evenly across both sides of your screen.
Allow it to sit for a few minutes before you use the scrubber to gently scrub your screen. Once done, use a hose to run cool water down your screen.
Place your screen on your screen rack if you have one. If place it horizontally like you would a stack of cleanup cards. Make sure your screen has enough airflow on both sides of your mesh. Wait until your screen is completely dry before starting the next step. Make sure your room is well aired.
In this step, you’ll apply the emulsion to your screen. You can place the screen at a 30-45 degree angle against the wall. Make sure your screen has adequate support and is standing unaided. Or you can hold the top of your screen with a firm grip and slant it until it is at a 30-45 degree angle where you can comfortably apply pressure and move the scooper towards the top evenly applying the emulsion solution.
If you are using a scoop coater you’ll fill the tub with emulsion solution and allow it to settle. Place your scooper coater at the base of your screen, make sure it is sturdy and not moving when you press down on it. If it is adjust it until it is safely standing.
Place your scoop coater at the bottom, tip it slightly allowing the emulsion solution to transfer to the mesh, and then move it in a gentle continuous steady motion until you get to the top.