The process of printing onto transfer paper which will then be placed on a t-shirt or other type of fabric is a two step process. The first thing you need to do is set up the printer before loading it with your image as described in steps one through four above. Once loaded, print out the design and wait for it to come off of the printer so that it can be transferred onto whichever piece of clothing you have chosen (step five).
Place the transfer paper on a hard surface.
Prepare the surface by covering with a cloth or other type of material.
Pour distilled water into the water well of your printer and make sure that there is enough for it to print without running out of ink or other material. If you want, you can use rubbing alcohol instead but only in conjunction with distilled water because rubbing alcohol will cause ink to run and smear where as distilled water would not do this. (If using a black-and-white printer, substitute “black” for “distilled”.)
Load up your tshirt by pressing down on one side of it at a time before turning it over so that the entire shirt is facing downwards onto an empty space between two sheets of transfer paper where you will be printing.
Once the tshirt is loaded, make sure that it’s not too tight or loose and then close up your printer so that nothing falls out of place. Open a file on your computer with an image in .png, .jpg, or .gif format before dragging/dropping this into your print queue within the software installed on your machine (i.e., Adobe Illustrator). If using Photoshop CC 2017+, open File > Print still works as expected for our purposes here since we are only talking about black-andwhite images at present). Check “print margins” to adjust those settings if desired but these defaults should work well enough for most tasks; I would recommend leaving them alone.
Press print and then wait for the t-shirt to be printed before unloading it. The image you just created will now have transferred onto your shirt so all that is left to do at this point is remove the transfer paper from beneath it before washing, drying, or ironing as applicable.
The answer is yes and no. You will need to use a water-based ink in order for the process of transferring the image onto your desired fabric to work properly, but you can choose from any color or type that meets those criteria (i.e., cyan, magenta, yellow). So while there are specific printer inks available on the market designed specifically for this purpose as noted above (#Step Three), it’s not necessary if all you want to do is print out an image and transfer it onto another surface like your tshirt rather than create something related to textiles such as quilts or other types of clothing where strength may be more important than flexibility with regards to materials used in construction. Here again I am assuming that we are only talking about black-and-white images at present.
Transfers come in different types which can affect the quality of your output. The two main types are “screen” and “sublimation”. Sublimation transfers will give you a better result all around but they’re more expensive, harder to find, and not as widely available as screen prints; this is because sublimations are printed onto special paper before being placed on fabric while screens work with heat rather than ink/paint so that it sticks to whatever surface it’s applied to during the process.
* Step One: Try using a photocopier.
* Step Two: If that doesn’t work, try to print the desired image onto a high quality glossy printer paper and then cut out around it while leaving about an eighth of an inch all around.
* Step Three: Finally, place this on top of what you want printed before pressing any button or lever with your hands or feet (depending on how the machine is set up). Keep in mind that you may have to change ink cartridges if they’re running low after doing this process five times as well but other than that there should be no real additional requirements for printing onto transfer paper.
This can help save time when transferring images from one surface to another such as when you want to print onto transfer paper but don’t have a printer.
* Step One: To make the graphite transfer paper, you will need to mix together two cups of flour with a half-cup of water and then add some salt for seasoning.
* Step Two: Next, knead this dough into a ball until it’s smooth before placing in between two sheets of waxed kitchen parchment (or just regular old nonstick cooking sheet) on top of a cookie pan or other flat surface.
* Step Three: Place something heavy over this such as a cast-iron pot filled with sand so that the weight will push down onto these pieces while baking at 325°F degrees Fahrenheit for 45 minutes. Once done, remove from oven and let cool for five minutes after which time wash off any excess oil with a cloth or other type of material.
* Step Four: Once this is done, cut around the outer edge with scissors and then pull off both pieces to form your graphite paper; now it’s ready to be printed onto. (If you want clear transfer sheets without any white border like the ones pictured in my video above, simply use aluminum foil instead.)