The site team maintains a blog to share information about screen printing, and other things related. Any question? Just ask!  We will provide you with professional responses within 24 hours. Our goal is to make your perfect t-shirt printing business!

If you’re looking for a way to add a personal touch to your shirt, consider monogramming. Monogramming is the process of adding a personalized design to a garment. It can be done using a variety of fonts and placements, making it a very versatile customization option. In this blog post, we will cover everything you need to know about monogramming shirts! We’ll discuss what monogramming is, the different types of fonts available, how to choose the right placement, and the steps involved in the actual monogramming process. Plus, we’ll give you some tips for taking care of your new monogrammed shirt!

Monogramming is the process of adding a personalized design to a garment. It can be done using a variety of fonts and placements, making it a very versatile customization option. Monograms are often used to add a personal touch to an otherwise plain shirt. They can also be used to show off your initials or make a statement with a larger design.

There are many different fonts that can be used for monogramming. The most popular options are block letters, script letters, and cursive letters. Each type of font has its own unique look and feel, so it’s important to choose one that you think will best suit your shirt. You can also experiment with different placements and sizes to find the perfect look for your shirt.

The placement of your monogram is just as important as the font you choose. The most common placements are on the chest, on the sleeve, or on the back of the shirt. You can also experiment with different placements to find what looks best on your shirt. Just remember that the placement should be visible and easy to read.

Monogramming a shirt is a fairly simple process:

• First, you’ll need to choose your font and placement.
• Next, you’ll need to gather some supplies, including an embroidery hoop, thread, and a needle.
• Once you have your supplies, you’ll need to transfer your design onto the shirt. To do this, you can either use a stencil or freehand it.
• Once your design is transferred, you’re ready to start embroidering! Start by threading your needle and then stitch around the outline of your design. Fill in the rest of your design with stitches until it’s complete.

Once you’ve monogrammed your shirt, it’s important to take care of it so that it lasts long. Be sure to wash it according to the garment’s care instructions. You should also avoid ironing over the monogram as this can damage the threads. If you need to iron your shirt, do so on the reverse side. Finally, store your shirt in a cool, dry place out of direct sunlight.

Embroidering a monogram onto a shirt is a fairly simple process:

1. First, you’ll need to choose your font and placement.
2. Next, you’ll need to gather some supplies, including an embroidery hoop, thread, and a needle.
3. Once you have your supplies, you’ll need to transfer your design onto the shirt. To do this, you can either use a stencil or freehand it.
4. Once your design is transferred, you’re ready to start embroidering! Start by threading your needle and then stitch around the outline of your design. Fill in the rest of your design with stitches until it’s complete.

This is a matter of opinion. Some people think that monogrammed shirts are tacky, while others think that they’re a stylish way to add a personal touch to an outfit. Ultimately, it’s up to you to decide whether or not you want to monogram your shirt. If you do decide to monogram your shirt, be sure to choose a font and placement that you like. You should also take care of your shirt so that it lasts long. Wash it according to the care instructions and avoid ironing over the monogram. Store your shirt in a cool, dry place out of direct sunlight.

A monogram is an embroidered design on a shirt that typically consists of a person’s initials. Monograms can be used to add a personal toucg to an otherwise plain shirt. They can also be used to show off your initials or make a statement with a larger design. When choosing a monogram for your shirt, you’ll need to decide on the font, placement, and size. You’ll also need to take care of your shirt so that it lasts long. Wash it according to the care instructions and avoid ironing over the monogram. Store your shirt in a cool, dry place out of direct sunlight.

Do you want to start a t-shirt business? Or maybe you’re just looking to create some custom apparel for your friends and family? If so, a heat press machine is the tool for you! In this blog post, we will teach you how to set the time and temperature on your heat press machine for different types of materials. We’ll also give you some tips and tricks for getting the best results from your heat press. So whether you’re a beginner or an experienced user, read on for all the information you need to get started with this handy machine!

A heat press is a machine that uses heat and pressure to transfer images, patterns, or designs onto fabric. It’s a popular tool for creating custom t-shirts, sweatshirts, mugs, and more.

The time and temperature settings on your heat press will depend on the type of material you’re using. For example, if you’re pressing a t-shirt made of 100% cotton, you’ll need to set your machine to a higher temperature than if you were pressing a polyester shirt. You can find specific instructions for each type of material in the user manual for your heat press machine.

The ideal settings for your heat press will depend on the type of material you’re using. For most materials, you’ll need to set the temperature between 375 and 400 degrees Fahrenheit. The time setting will also vary depending on the material, but a good rule of thumb is to set it for about 15-20 seconds.

Most heat press machines have two dials: one for setting the temperature and one for setting the timer. To set the combination, simply turn both dials to the desired settings. If your machine has a digital display, you can usually just enter in the desired numbers.

Some newer models of heat press machines come with a built-in computer that allows you to program specific settings for different materials. To do this, simply follow the instructions in your user manual.

For most polyester fabrics, you’ll need to set your heat press to a temperature between 375 and 400 degrees Fahrenheit. The time setting will vary depending on the thickness of the fabric, but a good rule of thumb is to set it for about 15-20 seconds.

• The design is not transferring correctly: This could be due to several factors, such as incorrect time and temperature settings, or using the wrong type of transfer paper.
• The design is not staying in place: This could be due to insufficient heat or pressure, or using an old or damaged transfer paper.
• The design is peeling off: This could be due to using too much heat, not enough pressure, or incorrect time and temperature settings.

If you’re having trouble with your heat press, here are a few troubleshooting tips that might help:

• Make sure you’re using the correct time and temperature settings for your material.
• Check the user manual for your machine to make sure you’re using it correctly.
• If you’re having trouble with the transfer paper, try a different type of paper.
• Try pressing a test piece of fabric to see if the problem is with your machine or the material you’re using.

Creating custom clothing and other items with a heat press is easy! Just follow these steps:

• Choose your design: You can either create your own design or find one online. If you’re creating your own design, make sure it’s in a format that can be used for heat transfer (such as JPEG or PNG).
• Choose your shirt: Once you’ve chosen your design, it’s time to pick out the shirt (or other item) that you want to use. Keep in mind that different materials will require different time and temperature settings.
• Print your design: If you’re using your own design, you’ll need to print it onto heat transfer paper. You can either do this yourself or have it done professionally.
• Cut out your design: Once your design is printed, use scissors or a craft knife to cut out the shape of the design.
• Place your design on the shirt: Place the heat transfer paper on the shirt (design side down) and position it where you want it.
• Press your shirt: Set the time and temperature on your heat press according to the type of material you’re using, then place the shirt on the press and close it. After a few seconds, open up the press to check if the design has transferred. If it hasn’t, try pressing it for a few more seconds.

Here are a few tips and tricks from experienced heat press users:

• Use a teflon sheet: This will help to prevent your design from sticking to the press or getting damaged.
• Use heat resistant tape: This can be used to secure your design in place before pressing, as well as to reinforce weak areas or seams.
• Use a test piece of fabric: Before pressing your final project, do a test run on a scrap piece of similar material. This will help you to get the time and temperature settings just right.
• Be careful with delicate materials: If you’re using a heat press on delicate fabrics, be sure to use a lower temperature setting and/or a teflon sheet to protect the material.

Do you want to start printing your own designs on clothing and fabric? A heat press is the essential tool that you need to get started! In this blog post, we will go over the basics of what you need to get started. You will need a heat press, heat-resistant gloves, Teflon sheet or parchment paper, clothing or fabric to print on, inkjet printer that uses dye sublimation ink cartridges, and software to create designs (optional). We will also discuss some tips for getting started.

So, what is a heat press? A heat press is a machine that uses heat and pressure to transfer designs onto clothing or fabric. Heat presses are available in a variety of sizes and styles. The most common type of heat press is the clamshell heat press, which has two plates that open and close like a clam shell. There are also swing-arm heat presses, which have one plate that swings out of the way so that you can place your garment on the other plate.

Now that you know what a heat press is and how it works, let’s go over what you need to get started. The first thing you need is a heat press. Heat presses are available in a variety of sizes, so you will need to choose one that is right for you. The next thing you need is heat-resistant gloves. These gloves will protect your hands from the heat when you are using the heat press. Teflon sheet or parchment paper can also be used to protect your garments from the heat of the press.

The next thing you need is clothing or fabric to print on. You can use any type of garment, but it is important to choose a fabric that will accept the inkjet transfer paper. Cotton and polyester are both good choices. If you are using a dark-colored garment, you will also need to use a transfer paper that is designed for dark garments.

The next thing you need is an inkjet printer that uses dye sublimation ink cartridges. These printers are designed to print designs onto transfer paper. You can find these printers at most office supply stores or online. Once you have a printer, you will also need software to create your designs. There are many software programs available that can be used to create designs for heat transfer.

• The first tip is to practice on a scrap piece of fabric before you try printing on a garment. This will help you get a feel for how the heat press works and how to use it.
• The second tip is to read the instructions that come with your heat press.
• These instructions will help you understand how to use the machine and how to care for it. The third tip is to experiment with different settings on your heat press. You can change the temperature, pressure, and time to get the perfect print.

If you are using an inkjet printer to print your designs, you will need to use a transfer paper. Transfer papers are available in a variety of colors, so you can choose one that is right for your project. You can find transfer papers at most office supply stores or online. When you are choosing a transfer paper, it is important to choose one that is compatible with your printer and heat press.

• Practice on a scrap piece of fabric before you try printing on a garment. This will help you get a feel for how the heat press works and how to use it.
• Read the instructions that come with your heat press. These instructions will help you understand how to use the machine and how to care for it.
• Experiment with different settings on your heat press. You can change the temperature, pressure, and time to get the perfect print.

It is important to read the instructions that come with your heat press to learn how to care for it. Most heat presses require that you clean them after each use. You can use a damp cloth to wipe down the plates and a mild soap to remove any ink or residue. It is also important to oil the machine regularly to keep it in good working condition.

No, an air compressor is not required for a heat press. However, if you plan on using one, it is important to choose an air compressor that is compatible with your heat press. You can find air compressors at most hardware stores or online. When you are choosing an air compressor, it is important to consider the size of the unit and the pressure it produces. Choose a unit that will be able to provide enough pressure for your heat press.

No, you will need an inkjet printer that uses dye sublimation ink cartridges. These printers are designed to print designs onto transfer paper. You can find these printers at most office supply stores or online. Once you have a printer, you will also need software to create your designs. There are many software programs available that can be used to create designs for heat transfer.

When you are choosing a transfer paper, it is important to choose one that is compatible with your printer and heat press.

You can use any type of garment, but it is important to choose a fabric that will accept the inkjet transfer paper. Cotton and polyester are both good choices. You can also use other fabrics, such as denim, but you may need to pre-treat the fabric before printing.

Making your own glow-in-the-dark shirts is a fun and easy project that can be completed in just a few steps. All you need are some basic supplies and a little bit of creativity! In this blog post, we will walk you through the steps involved in creating your own custom glow-in-the-dark shirts.

The first step is to gather your supplies. You will need a shirt (or shirts), glow-in-the-dark fabric paint, and a paintbrush. Once you have all of your supplies, it’s time to get started!

Begin by prepping your shirt (or shirts). If you are using new shirts, you will want to wash and dry them before beginning. This will help the paint adhere better to the fabric. If you are using old shirts, simply make sure they are clean and free of any dirt or debris.

Once your shirt is prepped and ready to go, it’s time to start painting! Begin by sketching out your design on a piece of paper. This will help you plan out your design and ensure that everything is symmetrical. Once you have a plan, start painting your design onto the shirt using the glow-in-the-dark fabric paint. Be sure to work in a well-ventilated area, as the fumes from the paint can be strong.

Once you have finished painting your design, set the shirt aside to dry. The paint will need to cure for 24 hours before it is fully set. Once the paint has cured, your shirt is ready to wear! Be sure to store it in a dark place when you’re not wearing it, as this will help preserve the glow of the fabric paint.

There are a few things to keep in mind when making your own glow-in-the-dark shirts. First, be sure to use a light source that is bright enough to charge the fabric paint. A black light is ideal, but you can also use sunlight or a regular light bulb. Second, be sure to apply several thin coats of paint rather than one thick coat. This will help the paint adhere better to the fabric and produce a more even glow. Finally, be careful not to overcharge the fabric paint. This can cause it to lose its glow over time.

There are a few things you’ll want to watch out for when making your own glow-in-the-dark shirts.

First, be sure to work in a well-ventilated area. The fumes from the fabric paint can be strong, so it’s important to make sure you’re not breathing them in too much. Second, be careful not to overcharge the fabric paint. This can cause it to lose its glow over time. Finally, be aware that the paint may rub off on light-colored clothing. If you’re concerned about this, you can always wear a dark shirt underneath your glow-in-the-dark shirt to prevent any color transfer.

Once you have made your own glow-in-the-dark shirts, you’ll need to store them properly in order to preserve the life of the fabric paint. The best way to do this is to store them in a dark place when you’re not wearing them. This will help prevent the fabric paint from fading or losing its glow. You can also store your shirts in a plastic bag to help protect them from dust and debris.

If you’re looking for some fun project ideas, here are a few things you can do with your new glow-in-the-dark shirts:

• Wear them to a blacklight party!
• Use them as safety gear when biking or running at night.
• Make matching shirts for you and your friends.
• Create a one-of-a-kind t-shirt design.
• Have fun and be creative! There are endless possibilities when it comes to glow-in-the-dark shirts. So get out there and start making your own today!

The first thing you will need to do is buy a vinyl cutter. These can be found on Amazon or in craft stores for affordable prices (around $100-$150). With the purchase of this machine, it will come with some software and an art pack that contains different designs as well as fonts and pictures.

The next step is to download your desired design from any website onto your computer. Then go ahead and open up the program provided by the provider of the vinyl cutter’s hardware. In my case, I was using Silhouette Studio Designer Edition – which comes installed on my laptop when I bought it at Best Buy last year- so all I had to do was import what ever file type had been downloaded previously into their software and then click the file and drag it to where I wanted it positioned.

Remember, you are only limited by your imagination when designing these decals! You can use pictures of your family or words that represent who you are as a person. Here are some ideas:

• Pictures from vacations/family events
• Quotes about life goals
• Your favorite hobby or sport team’s logo design
• A saying that inspires you

The next step is to choose an art pack on the software package and load in what ever image was chosen for this project before cutting out certain portions with a razor blade (or xacto knife). Remember, if using one type of material like vinyl then keep all surfaces clean so they will adhere and stick.

• Using an xacto knife, cut out the design you want to use onto a piece of vinyl and then peel off the backing
• Then place it on whatever surface you are wanting to apply it too (fabric is very popular) wait about 30 seconds before peeling back the protective layer that was underneath where your decal will be applied
• The last step is just waiting for all surfaces to dry! It only takes a few minutes after heating up with a blowdryer or ironing flat so if done correctly this project should take less than 15 minutes from start to finish.

Decide on a design, and then choose your size. Most designs are available in multiple sizes from lettering for pen holders to large signs that cover the entire side of a building or barn door. If you want it printed on clear material (opaque), let us know when you check out. The cost depends on how much space your design takes up, but smaller ones start as low as $50! We recommend ordering at least one larger piece with an outline around it so people can see what’s there without needing to get close enough to read the writing underneath. When finished shopping, place items into cart and select checkout button below this paragraph.

Vinyl is a durable material with the flexibility to be cut into shapes just like paper or fabric. The most common type of vinyl used in making custom cuts for signage and vehicle graphics is called cast film (aka CNC film). Cast films are uniform in thickness – they maintain their shape even when bent around corners and can withstand cold conditions without becoming brittle. They also have superior clarity so designs will print crisply on it without any distortion from backlighting while providing an excellent substrate for either screen printing or digital printing methods such as Roland Eco Solvent Inkjet Film Printing System . If you’re looking at doing large quantity orders please contact us because we offer discounts! And don’t forget to take a look at our other products like diecut vinyls, banners and more in the shop!

As an alternative to scissors, you can use this blade to cut along any designs with sharp edges. The X-Acto knife will not damage or distort your material. It is also a great tool if you need to add smaller details like lettering that may be difficult using just a pair of scissors. Use the pen as a guide and press firmly against it while sliding across your surface in one stroke to get clean cuts! Here are some other tips on how we recommend getting started:

• Use low heat when ironing onto adhesive sheets – too much heat will result in distortion.
• Cutting out shapes from adhesive sheet stock requires more care than paper – rough surfaces such as laminated materials should be pre-cut before application.
• It’s much easier to cut shapes out of vinyl if it is not stretched tightly across a surface – use weights or clamps to hold down the material while cutting.

A cutting surface or other suitable sharp cutting utensils:

Your vinyl will need a hard, flat surface to cut on. A heavy piece of glass works well for this. You can also use the mat that comes with your diecut machine! Applying pressure while using an x-acto knife is essential to getting clean cuts. If you are having trouble see if it would be easier to get through by slightly changing the angle of your blade and applying more force.

Record the design on paper with a pencil or pen. Tape both sheets together and cut out your shape using sharp scissors

Scotch tape: Scotch brand transparent tape is excellent for this purpose because it does not leave any adhesive residue when removed. For vinyl shapes, use only clear (non-adhesive) scotch tapes as they will not stick once applied to semi-transparent material such as cast film. Transfer tape is also great if you need something less expensive but want similar results! You can find either type at your local craft store in varying widths – we recommend trying ¼” to start with smaller projects like pens or keychains. If you’re looking for more information about how our products are made check out our blog for more detailed tutorials!

We recommend starting with small projects like pens or keychains.

Scotch brand transparent tape is excellent because it does not leave any adhesive residue when removed and works best on semi-transparent material such as cast film. Transfer tapes are also great if you need something less expensive but want similar results – we recommend trying ¼” to start with smaller projects. If you’re looking for more information about how our products are made, check out the blogs for more details!

Product Description: This product is a peel and stick vinyl that can be applied to any smooth, clean surface. Our adhesive-backed colored vinyl has superior clarity so designs will print crisply on it without distortion from backlighting while providing an excellent substrate for screen printing or digital printing methods such as Roland Eco Solvent Inkjet Film Printing System

This material can also withstand outdoor conditions with proper protection; it’s fade resistant against natural elements like wind, rain, snow etc. The non-adhesive side of the film should always face outward when installed outdoors – this prevents water droplets from getting stuck in between two layers! For smaller projects (such as car decals), we recommend using our clear cast films which are thinner and less bulky than vinyl sheets.

The adhesive backed colored vinyl is easy to use, just peel off the liner and stick it onto your surface – that’s all there is to it!

 color choice is up to you.This material can also withstand outdoor conditions with proper protection; it’s fade resistant against natural elements like wind, rain, snow etc. The non-adhesive side of the film should always face outward when installed outdoors – this prevents water droplets from getting stuck in between two layers! For smaller projects (such as car decals), we recommend using our clear cast films which are thinner and less bulky than vinyl sheets.

The adhesive backed colored vinyl is easy to use just peel off the liner and stick it onto your surface that’s all there is to it!

 I prefer a needle-nosed pair, really sharp points.Product Description: This is a crucial tool in your diecut machine kit because it will help you place tiny pieces. Tweezers come shaped like an L or T to be able to get those hard-to-reach places and can make the difference between cutting out perfect shapes and botched ones!

Tweezers are required tools for any craft project that requires small details, as they allow you to pick up very small items with ease.

Tweezers should always have extra grip on one side of the handle – this type is called “ergonomic” tweezers which give greater control when using them. They also provide more precision because there is less chance of accidentally crushing what’s being held (especially if it’s delicate). The pointed tip will help you to get into tight spaces and the sharp points are perfect for picking up tiny pieces.

We recommend our gold plated tweezers because they’re top of the line quality! These work wonderfully with any project that requires precision – just be careful not to use them as scissors or pry anything open! If your tweezers don’t have an ergonomic grip on one side try gripping it like a pen where you would hold it closer to the pointy end rather than at its widest point which may cause hand fatigue after prolonged use. You should always make sure that your hands are clean before using this tool, and be aware of the dangers you might encounter (such as poking your eye out with a pointy end).

This is a crucial tool in your diecut machine kit because it will help you cut out desired shapes. Scissors are typically known as shears, and come shaped like an L or T to be able to get those hard-to-reach places and can make the difference between cutting out perfect shapes and botched ones!

Scissors should always have extra grip on one side of the handle – this type is called “ergonomic” scissors which give greater control when using them. They also provide more precision because there is less chance of accidentally crushing what’s being held (especially if it’s delicate). The pointed tip will help you with tight spaces that need detail work, while sharp points allow for precise cuts.

Transfer tape specially made tape with the adhesive strength in between that of scotch tape and a post-it note.

This is a crucial tool in your diecut machine kit because it will help you apply images to surfaces. Transfer tape comes on an adhesive backing and can be cut with scissors or used as-is for smaller projects, such as car decals. The non-adhesive side of the film should always face outward when installed outdoors – this prevents water droplets from getting stuck in between two layers!

Transfer tapes come in different shapes (such as dots) but I prefer using our clear transfer tape which can withstand outdoor conditions. Some applications use printable films instead of transfer tapes so we recommend doing research into what’s best for each project type before deciding on one method over another. It may take some time to get used to how sticky transfer tape is, so if you find yourself struggling to remove the backing when installing it start by peeling off a corner and slowly work your way across from there.

Please use with caution! This product contains chemicals which can be harmful to humans in large doses. Keep away from children at all times or store securely out of reach – they may accidentally ingest these items while exploring their environment. If ingested call poison control immediately (US) or take them to hospital for treatment as soon as possible (Canada). The adhesive on transfer tapes should not come into contact with other surfaces such as clothing because it will leave a residue that will need professional attention; we recommend using old newspapers for protection before applying film over top of something delicate like wallpaper.

This is a crucial skill for any DIY’er because it will help you to not give up when working on your project. There are times where things don’t go as planned and you’ll need patience in order make sure that the problem gets fixed so try not get discouraged!

We recommend our clear transfer tape which can withstand outdoor conditions (as opposed to inkjet) and can usually be found at most craft stores. It may take some time getting used to how sticky transfer tape is, but if you find yourself struggling with removing the backing start by peeling off a corner an slowly work your way across from there. Keep away from children at all times or store securely out of reach – they may accidentally ingest these items while exploring their environment.

Soak your tie dye in cold water with vinegar. The vinegar helps the color stay and not fade. Wash it in cold water until it has been washed a few times. Use gentle, color-safe detergents.

• Fill the pot with water and bring it to a boil
• Add your shirts or material of choice. Make sure they are submerged in the boiling water before you turn off the heat!
• Let them sit for up to 30 minutes (do not let them dry out). Stir occasionally if needed. The more time, the darker dye will be on the fabric/shirt. Remove from saucepan when ready and cover with cold water until cool enough to handle comfortably

• Fill the sink with ice cubes and add salt so that clothes can soak without sticking together too much as well as help maintain their color faster than washes alone would do – about 20lbs is good but any amount will work
• Soak clothes, as long as possible (about 45 minutes is good)
• Rinse thoroughly with cold water and repeat until the color no longer appears to be fading. This may take up to three times for some colors!

• Add your choice of dye solution. You can use the same one that you used on a previous wash if it’s still looking pretty vibrant or mix things up by using another dye or even an acrylic paint/ink mixture from craft stores

Note about Dyeing With Acrylic Paints… these are typically very light in nature – more pastel than bright – so keep this in mind when mixing ingredients together. When adding paint over top of a darker shirt, start with a very light layer – if it looks too intense, add more paint to the mixture.

• Pour dye over the clothes and let them sit for about 30 minutes. Stir occasionally so that all of your shirts or cloth are fully soaked with dye

Repeat until the desired color is reached! Remember: More coats equal darker colors (up to four) but only one coat will produce an interesting pastel appearance in most cases

• Rinse thoroughly in cold water after soaking as long as you can tolerate without being uncomfortable
• Hang dry and repeat the process every few weeks or when the fabric starts fading again. You can also use these same steps on any garment made from 100% cotton or other natural fibers such as silk, wool, and linen.

• a dark-colored cotton sweatshirt, or other garments
• household bleach
• a plastic bucket
• a pair of gloves
• several rubber bands
• spray bottle (optional)
• mild laundry detergent

If you are looking to save money on clothes then try dyeing your own at home instead of buying new ones from stores. It’s fun too!

Bleach is a gentler way to strip the color out of cotton. You can also use baking soda and vinegar for the same purpose but it won’t be as easy on your clothes or fabric as bleach would be.

When you’re dealing with polyester, nylon, or acrylic fabrics, make sure that you test first because these materials are more sensitive to chemicals than natural fibers are. If they don’t react well then avoid using them at all costs!

These items should not be exposed to chlorine bleach due to its high alkalinity content and ability to remove leather’s oils (leather dyes cannot penetrate through oil). Use oxalic acid or hydrogen peroxide instead.

The fabric’s natural protein fibers can react with the bleach and cause it to lose its strength, which could potentially result in a tear down the middle of your shirt! Some silk garments are pre-washed before shipping so if you know that this is true for yours then use cold water only when washing without any other additives (vinegar won’t help). If not sure – test first by pouring just one cupful on an inconspicuous spot to see how it reacts!

This material needs special care because the lanolin from wool will make clothes more susceptible to stretching out and fading as well as shrinking too much. Avoid using bleach altogether but do try soap flakes mixed with water as an alternative!

This material is rather delicate so it should be washed in cold water only and with a gentle soap or detergent. Avoid anything else, including bleach which could seep into the fibers and weaken them over time.

– White: bleach is usually what you want to use for this and it will produce a light pastel color.

*Note about Dyeing With Acrylic Paints… these are typically very light in nature – more pastel than bright – so keep this in mind when mixing ingredients together. When adding paint over top of a darker shirt, start with a very light layer – if it looks too intense, add more paint to the mixture.

– Pour dye over the clothes and let them sit for about 30 minutes. Stir occasionally so that all of your shirts or cloth are fully soaked with dye

Repeat until the desired color is reached! Remember: More coats equal darker colors (up to four) but only one coat will produce an interesting pastel appearance in most cases

– Rinse thoroughly in cold water after soaking as long as you can tolerate without being uncomfortable

– Hang dry and repeat the process every few weeks or when the fabric starts fading again **You can also use these same steps on any garment made from 100% cotton or other natural fibers such as silk, wool, and linen.

Here are some important considerations when working with a strong chemical like bleach.

• Wear rubber gloves to protect your hands while you’re dying with bleach.
• Remember that bleach is a strong chemical, and its fumes can be dangerous. So work in a well-ventilated area, or outside if you can.
• Wear old clothes that you don’t mind getting bleach on.

• Toss in a few ounces of bleach, and stir with your hands to distribute.

• Add some food coloring or liquid watercolor if you want color too!

• Apply the dye mixture with a paintbrush all over your shirt (this is fun because it resembles painting)

Here are a few different ways to apply bleach.

Bucket Method: Fill a bucket with water and mix in the bleach. Submerge your shirt and soak it to cover as much of the fabric as possible (don’t forget about inside seams!)

Paintbrush Method: Use a paintbrush or sponge, dip it into the dye mixture then spread on your shirt. Be sure to avoid any spots that would be covered by other clothing, such as where pockets typically are. You can also use this technique for more unique patterns like stripes- just make sure you apply enough layers so everything is fully saturated before moving onto another area

Spray Bottle Method: Fill up an empty spray bottle with some cold water and add the bleach – now soak your clothes in small sections at a time until they have been fully covered.

Remember that bleach is a strong chemical, and its fumes can be dangerous. So work in a well-ventilated area or outside if you can.

If you’re using food coloring to dye your clothes then don’t let it sit for too long before washing! Mix the colors together until they are uniform and apply with a paintbrush onto sections of fabric – soak up as much liquid as possible but remember to leave the room so the color doesn’t seep out onto other articles of clothing (it’s okay to use rubber gloves). Let dry completely on top of newspaper or old towels before putting them into the washer and wash cycle. Rinse thoroughly after soaking for at least 30 minutes (longer is better).

• Bleach
• Rubber Gloves
• Spray Bottle
• Blank T-shirts
• Cardboard

– Lay your shirts on a flat surface, cardboard or plastic (whatever you have)

– Keep in mind that the design will always be reversed when it is finished. This means that if you want to put part of the design on the front and another section on the back, lay them with this side up/down configuration so they are facing outwards

– Make sure there’s space between each shirt for maximum coverage. You may need more than one tray depending on how many T-shirts you’re using

– If desired, use rubber bands around areas like sleeves to create different patterns or designs before applying dye mixture – these can also come in handy later during the drying process as well!​ ​ If working with cotton-only colors, be sure to add a thick layer of salt in between each shirt as this will help the colors set more quickly.

– Put on your rubber gloves and fill up a spray bottle with cold water and bleach – shake well!

– Spray down one section at a time, working from top to bottom. For thicker sections like sleeves or pant legs you may need to apply it twice for maximum coverage

– Let dry completely (preferably outside) before washing off with cool water – do not use any soap!​ ​ If using cotton only colors, soak clothes in warm salty water after they have dried

– Wash thoroughly afterward according to instructions provided by the manufacturer on the clothing label